Honeywell HC35WE3R3 - Figure 27 IEEE 802.1 X Configurations - EAP-TLS

36
Honeywell 35 Series IP Cameras User Guide
Figure 27 IEEE 802.1x Configurations – EAP-TLS
Note:
Honeywell doesn’t recommend enabling IEEE 802.1x.
Select EAP-TLS as the EAP method. Enter your ID and password issued by the CA, and
then upload related certificate(s).
3. When all settings are complete, move the camera to the protected LAN by
connecting it to an 802.1x enabled switch. The devices will then start the
authentication automatically.