62
Honeywell 35 Series IP Cameras User Guide
Patrol Management
Add patrol: Set the patrol ID/Name/Preset/Duration(s). Click START to start record.
Click END to end record.
Click review your recorded patrol.
Click to stop the patrol review.
Click to remove the patrol.
This patrol list displays the configured patrols. Note that only one patrol can be applied
at a time.
Recording Patrol
Go to Setup PTZ Setup Recording Patrol.
Figure 41 Recording Patrol
: Click the buttons to move the video image up/right/down/left/45-degree tilt
and click to return to the home location.
ZOOM: Click to zoom out the video image, or click to zoom in the video image.
FOCUS: Click and to adjust the Focus setting.
IRIS: Click and to adjust the IRIS setting.
Speed [1-8]: Select the movement speed for camera view. The speed range is 1 to 8 and
the default setting is 5.
Recording Patrol Management
Add recording patrol: Set the recording patrol ID and Name. Click START to start record.
Click END to end record.
Click review your recording
To Next Page
Loading...
Need help?
General
