9.3.2 Receive ROM from the MaxCom Gold to the PC
To transmit the software in the MaxCom Gold to your PC, perform the following
procedure.
1. Select the correct communication settings (COM port and baud rate) for your
configuration.
2. Click on the Receive ROM button. A dialogue box appears for selecting the location
for storing the file and naming the file.
3. To select a location other than the one that is displayed, click on the down arrow
beside the Save in: field and select a drive and/or folder.
4. Type in a filename and click on Save.
Rev. 1 101 900.0560
18-July-2005
To Next Page
Loading...
Need help?
General
