1.5 USER LOG OFF
To log off the system and lock the controller, perform the following procedure.
1. Press 0
2. Press lock.
The system can be setup so a user is logged out after a period of inactivity. The
automatic log-out time is set using the PC Configuration Utility. The default period is
infinite; i.e. the automatic log out is disabled. Refer to section 8.3.9.
Note: if power is removed from the system, the user is automatically logged off. Upon
power up, the lock button is lit and the user must log back onto the system.
Rev. 1 4 900.0560
18-July-2005
To Next Page
Loading...
Need help?
General
