7.1.2 Camera Settings (RapidDomes), Continued
2. Auto 180 – Disabled/Enabled
Enabled turns the auto-180 feature on for the specified camera. Disabled turns
the auto-180 feature off for the specified camera. If the Auto-180 feature is
enabled, the camera will automatically pan 180° when an operator tries to tilt
down once the bottom tilt stop has been reached. This feature is very beneficial
if an operator is trying to follow someone that walks directly under the camera.
3. Digital Zoom – Disabled/Enabled
Enabled turns the digital zoom feature on for the specified camera. Disabled
turns the digital zoom feature off for the specified camera.
4. Home Setting – Tour 1/Preset 0/None
The Home function allows the camera to return to a preset or start a tour after a
user-defined period of inactivity (i.e. no keys have been pressed on the keypad,
no tour is being run, or the camera is not performing any other activity).
None – the home function is off.
Tour - If the home setting is set to Tour, the camera will start Tour 1 after the
defined period of inactivity.
Preset – if the home setting is set to Preset, the camera will go to preset 0 after
the defined period of inacitivty.
Home timer - If tour 1 or preset 0 is selected, the user can define the amount of
inactivity time the camera is to wait before starting the tour or preset. The timer
can be set from 1 to 127 minutes. The default value is 3 minutes. If an illegal
value is entered, the message Amending Illegal Value is displayed.
d. Select another camera to edit or press lock to exit the camera setting menu and
return to the camera menu.
Rev. 1 22 900.0560
18-July-2005
To Next Page
Loading...
Need help?
General
