7.1.7 Remote Reset, Continued
a. Press the 1 button to access the power-up reset menu.
b. Select the “camera to reset” by pressing the number buttons for the
corresponding camera, and then press the camera button. Note: if you select a
camera that is absent, the display returns to camera 1.
c. Press aux to reset the selected camera.
d. Press auto to reset all cameras.
e. Select another camera or press lock to exit.
2. Camera Reset
The camera reset function will only reset the camera module and not the whole
RapidDome. This feature is not available if data in the video is being used. It is only
available when the RS485 control is used.
Note: This function only works with RapidDomes fitted with a x18 zoom lens.
Programmed presets/tours will not be lost.
a. Press the 2 button to access the camera reset menu.
b. Select the “camera to reset” by pressing the number buttons for the
corresponding camera, and then press the camera button. Note: if you select a
camera that is absent, the display returns to camera 1.
c. Press aux to reset the selected camera.
d. Press auto to reset all cameras.
e. Select another camera or press lock to exit.
3. Factory Reset
WARNING: THIS OPTION WILL ERASE ALL USER
PROGRAMMED FUNCTIONS.
The factory reset has a more dramatic effect on the receiver. If this option is
performed, ALL presets and tours will be cleared and the camera is reset. The
home preset/tour functions will not work as it relies on presets. Alarm presets will be
lost, etc. This option is useful if you want to reprogram the camera presets from
scratch.
a. From the Remote Reset Menu, press the 3 button to access the factory reset
menu.
Rev. 1 30 900.0560
18-July-2005
To Next Page
Loading...
Need help?
General
