8.4.4 Sector Titles, Continued
2. Click on the desired camera. For example, click on Camera 1. A listing of the
Sector (1-16) for Camera 1 are displayed.
There are several buttons on the bottom of the window:
Send – After editing the fields, click on the Send button to transmit the configuration
to the MaxCom Gold.
Receive – To transmit the current configuration of Preset Titles stored in a MaxCom
Gold to the PC configuration utility, click on the receive button.
Reload – To return the screen to the default configuration or to the configuration
prior to any changes made in this editing session, press the Reload button.
Save – After editing, click on Save to save your changes.
3. Edit the titles of the sectors. Each sector may be given an alphanumeric title of up to
20 characters.
4. Click on Save to save any changes you have made. Note: If you click on another
camera prior to saving changes, the system will prompt you to save your changes.
Yes – saves the changes you made in the current window and opens the window for
the selected camera.
Rev. 1 87 900.0560
18-July-2005
To Next Page
Loading...
Need help?
General
