Honeywell IPC5000 - Page 74

- 64 -
2) 1 zone:
Set up at T1 = PV high limit value, T2 = PV high limit value, …. T7 = PV high limit
value (initial value)
3) 2 zones:
Set up at T2 ~ T7 = PV high limit value. T1 must be set up at a value that
defines zones.
2) 1 zone:
Set up at T1 = PV high limit value, T2 = PV high limit value… T7 = PV high limit value (initial
value)
3) 2 zones:
Set up at T2 ~ T7 = PV high limit value. T1 must be set up at a value that defines zones.
4) 3 zones:
Set up at T3 ~ T7 = PV high limit value. T1 and T2 must be set up at values that define
zones.
SP or PV → high
1
T1
T3
T4
T5
T2
T6
T7
SP or PV→ high
2 1
T1
T3
T2
T4
T5
T6
T7
2 1
T1
T2
3
T3
T4
T5
T6
T7
SP or PV→ high