Honeywell IPC5000 - INITIALIZE Screen; Fig. 3.21.1 INITIAL Screen; Fig. 3.21.2 Confirm for Initializing

- 80 -
3.21 INITIALIZE screen
Initializes program data and display program version of IPC5000
Fig. 3.21.1 INITIAL screen
If the a certain button is pressed, the message box is shown as followings,
Fig. 3.21.2 Confirm for initializing
If the Yes button is pressed, initializes the data as followings.
(1) PROGRAM DATA CLEAR
z Initializes all PROGRAM DATA to initial value.
z SSP1/2, TSP1/2, TIME, JC, SIG SET = 0, Start mode = SSP, PID group number.
(2) PID PARAMETERS CLEAR
z Initializes all data related to PID parameter of Channel 1 and 2.
z Each PID parameter will be initialized like below Table 3.21.1
WARNING
Before initializing, record
data to be clear, which you
already have set, because
you will be lost them.
(1)
01.23.MON
EXIT
12.59.01
INITIAL
NET SET TROUBLE
PROGRAM DATA CLEAR
INITIALIZE
SYS SET
Version : 1.0
PID PARAMETERS CLEAR
THE LAST DATA CLEAR
(2)
(3)
FM_ver: 1.0
01.23.MON
EXIT
12.59.01
INITIAL
NET SET TROUBLE
PROGRAM DATA CLEAR
INITIALIZE
SYS SET
Version : 1.0
PID PARAMETERS CLEAR
THE REST DATA CLEAR
Are you sure ?
Yes No
FM_ver: 1.0