www.honeywell.com/security
94 | Performance Series IR 1080p IP PTZ Camera User Guide
Figure 7-3 Configuring the Motion Detection Area
Table 7-2 Motion Detection Area Configuration
Parameter Function
Region
You can configure up to four regions with different motion detection
settings (sensitivity and threshold).
Sensitivity
Adjust the brightness sensitivity. You might need to increase the
brightness sensitivity to trigger motion detection. You can configure a
different sensitivity for each of the four regions. The sensitivity ranges
from 0 to 100. We recommend that you choose a sensitivity between
30 to 70. The default is 50.
Threshold
The threshold determines how much change in a scene is required to
trigger a motion detection alarm. The lower the threshold setting, the
easier it is to trigger an alarm. You can configure a different threshold
for each of the four regions. The sensitivity ranges from 0 to 100. We
recommend that you choose a sensitivity between 10 to 50.
Delete All Delete all motion detection areas.
Delete Delete the selected motion detection region.
To Next Page
Loading...
