RT10W Rugged Tablet 35
• Previous Devices - Displays a list of devices previously discovered Bluetooth
scanners.
Some scanners are not supported via Bluetooth Scanning. To connect one of these
scanners, see Adding Other Scanners.
If a scanner does not connect, see Troubleshooting for help.
Quick Connect
There are two different barcodes printed on decals on the side of the RT10W.
Note: The barcodes below are samples. Do not scan these to connect a Bluetooth scanner.
Scan the barcode on your device.
Using Quick Connect with Preprinted Labels
Scan the applicable barcode as indicated below:
Use the LnkB barcode on either side of the RT10W to connect the following
scanners:
• Honeywell/LXE 8650 family of Bluetooth ring scanners
• Honeywell Granit 1911i Bluetooth scanner
• Honeywell Granit 1981i Bluetooth scanner
• LXE 88x0 family of Bluetooth scanners
Use the barcode Quick Connect barcode on either side of the RT10W to connect
the following scanners:
• Intermec SF51 Bluetooth scanner
• Intermec SF61 Bluetooth scanner
• Intermec SR61 Bluetooth scanner
Using Quick Connect with On Screen Barcode
1. Select Bluetooth Scanning from the Control Panel (either large or small icon
view option must be selected).
2. Tap Add Device.
3. Select Quick Connect (incoming).
4. Tap Next.
LnkB Barcode Sample Quick Connect Barcode Sample
Bluetooth Quick Connect 007806111AAA
To Next Page
Loading...
