Honeywell RT10W User Manual

RT10W Rugged Tablet 49
4. Tap Add a VPN Connection.
5. From the VPN provider box, select a provider from the drop-down list.
Note: A VPN service provider will display in the drop-down list only if you have already
downloaded and installed that service provider’s app from the Windows Store.
6. Enter a Connection name.
7. In the Server name or address box, type the server name or IP address of the
VPN server.
8. In the VPN type box, choose one of the following:
• Point to Point Tunneling Protocol (PPTP)
• L2TP/IPsec with certificate
• L2TP/IPsec with pre-shared key
• Secure Socket Tunneling Protocol (SSTP)
• IKEv2
9. Select the Type of sign-in info required to connect to the VPN server and then
enter the required information.
10. Optional: Type a User Name and Password.
11. Tap Save. The VPN connection displays on the screen.
Wireless Security
The computer provides these security solutions for your wireless network:
• Wi-Fi Protected Access 2 (WPA2™)
• Wi-Fi Protected Access (WPA)
• 802.1x
•LEAP
•WEP
Honeywell recommends WPA2 security with PSK (Personal) or 802.1x (Enterprise)
key management.
Before you set security, you need to enable the radio, set the date, and set the SSID
on your computer. To use 802.1x security, you need to load a root certificate on
your computer. To use transport layer security (TLS) with 802.1x security, you also
need to load a user certificate.
Use the Settings App to access and configure all wireless security settings.

Honeywell RT10W Specifications

General

Brand	Honeywell
Model	RT10W
Category	Tablet
Language	English