Honeywell Sensepoint XCD - Review Mode

Sensepoint XCD Technical Manual SPXCDHMANEN Issue 15
55
Review Mode
The instrument will enter Review mode when the ‘Enter’ switch is activated with the Magnetic Wand and
held for around one second.
Names, displays and descriptions for each review item in Review Mode are shown in the following table.
Item name
Display
Description
Software version
S/W version of transmitter
SRS version
S/W version of SRS (watch dog)
EEP version
EEPROM parameter version
Gas
Gas type
Measuring range
A user selected measuring range
Calibration level
Calibration gas level
Calibration due
Estimated time to next calibration
Alarm 1
Alarm settings for Alarm 1
Alarm 2
Alarm settings for Alarm 2
Location
Location in which the transmitter is installed