Honeywell Stratos 2700 - Page 228

13 - 10
Beeper Pitch - Good Read *Tone 1 BEPCUR1 4-9
Tone 3 BEPCUR3 4-9
Tone 4 BEPCUR4 4-9
Tone 5 BEPCUR5 4-9
Tone 6 BEPCUR6 4-9
Tone 7 BEPCUR7 4-9
Tone 8 BEPCUR8 4-9
Beeper Duration - Good Read *Normal Beep BEPBIP0 4-10
Short Beep BEPBIP1 4-10
Number of Beeps - Good Read *1 BEPRPT1 4-10
Range 1 - 9 BEPRPT# 4-10
Beep on EAS Deactivation *Beep on EAS Deactivation Off EASBIP0 4-11
Beep on EAS Deactivation On EASBIP1 4-11
Beeper Pitch - Error *Razz BEPFQ2100 4-11
Medium Razz BEPFQ2175 4-11
High Razz BEPFQ24250 4-11
Number of Beeps/LED Flashes - Error (Range 1 - 9) *1 BEPERR# 4-12
Disabled Scanner LED Flash LED Flash Off 232CTF0 4-12
*LED Flash On 232CTF1 4-12
Reread Delay Very Short (400 ms) DLYRRD400 4-12
*Short (500 ms) DLYRRD500 4-12
Medium (750 ms) DLYRRD750 4-12
Long (1000 ms) DLYRRD1000 4-12
Extra Long (2000 ms) DLYRRD2000 4-12
User-Specified Reread Delay Range 0 - 30,000 ms DLYRRD##### 4-13
2D Reread Delay *2D Reread Delay Off DLY2RR0 4-13
Very Short (800 ms) DLY2RR800 4-13
Short (1000ms) DLY2RR1000 4-13
Medium (2000ms) DLY2RR2000 4-13
Long (3000ms) DLY2RR3000 4-14
Extra Long (4000ms) DLY2RR4000 4-14
Same Symbol Test *Same Symbol Test Off DLYSSP0 4-14
Same Symbol Test On DLYSSP1 4-14
Bar Code Absence Detection (Range 0-300,000 ms) *0 DLYDEC###### 4-14
Character Activation Mode *Off HSTCEN0 4-15
On HSTCEN1 4-15
Activation Character HSTACH## 4-15
Do Not End Character Activation After Good
Read
HSTCGD0 4-15
*End Character Activation After Good Read HSTCGD1 4-15
Character Activation Laser Timeout (Range 1
- 65535) *5000 ms
HSTCDT##### 4-16
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page