6TC500A BACnet Integration Guide
Regulation (EC) No 1907/2006
According to Article 33 of Reach Regulation, be informed that the substances listed
below may be contained in these products above the threshold level of 0.1% by
weight of the listed article.
Important Safety Information and Installation Precautions
Read all instructions
Failure to follow all instructions may result in equipment damage or a hazardous
condition. Read all instructions carefully before installing equipment.
When performing any work (installation, mounting, start-up), all manufacturer
instructions and in particular the Mounting Instructions (31-00399M-02) are to be
observed.
•TC500A Thermostat may be installed and mounted only by authorized and
trained personnel.
•It is recommended that devices be kept at room temperature for at least 24 hours
before applying power. This is to allow any condensation resulting from low
shipping/storage temperatures to evaporate.
•Do not open TC500A Thermostat, as it contains no user-serviceable parts inside!
•Investigated according to United States Standard UL- 60730-1, and UL60730-2-
9.
•Investigated according to Canadian National Standard(s) C22.2, No. 205-M1983
(CNL-listed).
•CE declarations according to LVD Directive 2014/35/EU and EMC Directive
2014/30/EU.
•Product standards are EN 60730-1 and EN 60730-2-9.
•TC500A Thermostat is Class B digital apparatus and complies with Canadian
ICES-003.
Local codes and practices
Always install equipment in accordance with the National Electric Code and in a
manner acceptable to the local authority having jurisdiction.
Electrostatic sensitivity
This product and its components may be susceptible to electrostatic discharge
(ESD). Use appropriate ESD grounding techniques while handling the product.
When possible, always handle the product by its non-electrical components.
Product/Part CodeSubstance NameCAS Number
Only TC500A-W /
thermostat mainboard
CBA, thermostat wall
plate board PCBA
Lead7439-92-1
Lead oxide1317-36-8
To Next Page
Loading...
Need help?
General
