CHAPTER
1
About TC500A9
INTRODUCTION
About TC500A
TC500A-N/TC500A-W Thermostat is an advanced, configurable, connected device
for commercial buildings. It controls and monitors Rooftop Unit, Heat Pump equip-
ment, and their configurations. This device communicates over Wi-Fi, Bluetooth,
Sylk, and easily integrates with the building automation system.
The built-in intelligent control algorithms of the device help to achieve the perfect
balance between Energy Efficiency and Comfort. The device is packaged with
numerous presets suitable for most commercial building requirements that enable
the easy and quick initial setup. The firmware of the device can be upgraded via Wi-
Fi network. The device has four universal terminals and a pair of Sylk terminals to
connect with sensors or other accessories. It also has a built-in temperature sen-
sor, humidity sensor, and proximity sensor.
Users can connect to the thermostat via Wi-Fi with the Honeywell Connect Me app.
The Honeywell Connect Me app gives authorized users access to the Honeywell
TC500 Thermostats in their commercial buildings. They can remotely monitor
sites, schedules, settings, and override controls. Users can add and configure
devices, manage users and more – all from a mobile device.
Scope of the document
The BACnet Integration document contains information related to BACnet Objects
and its properties of the thermostat that helps engineers to integrate and config-
ure the settings via a BACnet tool.
Reference documents
•TC500A Commercial Thermostat User guide (31-00400M-02)
•TC500A Commercial Thermostat Datasheet (31-00398M-02)
•TC500A Commercial Thermostat Mounting instructions (31-00399M-02)
•TC500A Commercial Thermostat Quick start guide (31-00401M-02)
To Next Page
Loading...
Need help?
General
