Using SCS commands 47
Command summary
Table 4-4 lists the SCS commands, including a brief description plus the required access rights and level.
Table 4-4 SCS command summary
Command Description, access right, and access level
Connect • Description: Accesses devices from the console port.
• Access right: Port-specific
• Access level: ADMIN or APPLIANCEADMIN (Users who do not have the ADMIN or
APPLIANCEADMIN level must have the appropriate port access configured to issue this
command.)
Disconnect • Description: Ends a device session initiated with Connect command
• Access right: Port-specific
• Access level: ADMIN or APPLIANCEADMIN (Users who do not have the ADMIN or
APPLIANCEADMIN level must have the appropriate port access configured to issue this
command.)
Help • Description: Displays information about commands
• Access right: None needed
• Access level: All
NFS • Description: Enables and disables using an NFS server to hold device session data
• Access right: SCON
• Access level: APPLIANCEADMIN
NTP • Description: Enables and disables using an NTP server to update the time on the SCS
• Access right: SCON
• Access level: APPLIANCEADMIN
Port Alert Add • Description: Adds a port alert string
• Access right: SCON or PCON
• Access level: ADMIN or APPLIANCEADMIN
Port Alert Copy • Description: Copies a port alert strings to another port
• Access right: SCON or PCON
• Access level: ADMIN or APPLIANCEADMIN
Port Alert Delete • Description: Deletes one or more port alert strings
• Access right: SCON or PCON
• Access level: ADMIN or APPLIANCEADMIN
Port Break • Description: Sends a break signal to the attached device
• Access right: BREAK
• Access level: ADMIN or APPLIANCEADMIN
Port History • Description: Accesses the port history buffer
• Access right: None needed
• Access level: All
Port Logout • Description: Terminates the SSM session on a specified port
• Access right: USER
• Access level: ADMIN or APPLIANCEADMIN
Port NFS • Description: Enables and disables the NFS feature on a port
• Access right: SCON or PCON
• Access level: ADMIN or APPLIANCEADMIN
Port Set • Description: Changes port settings
• Access right: SCON or PCON
• Access level: ADMIN or APPLIANCEADMIN
Port Set In/Out • Description: Specifies how carriage returns and linefeeds are treated in incoming or outgoing
serial data
• Access right: SCON or PCON
• Access level: ADMIN or APPLIANCEADMIN
Quit • Description: Terminates the current SSM session
• Access right: None needed
• Access level: All
To Next Page
Loading...
Need help?
General
