SCS commands 70
Show Port In/Out command
The Show Port In/Out command displays the translation settings for all ports. These translation settings indicate
how carriage returns and linefeeds are treated in incoming and outgoing serial data.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show port in|out
Show Server command
The Show Server command displays SCS configuration information, statistics, and the current time.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server
Table 5-31 Show Server command display fields
Field Content
Server IP address (from initial configuration or Server Set command)
Mask Subnet mask (from initial configuration or Server Set command)
Gateway Gateway IP address (from initial configuration or Server Set command)
Up Time Days, hours, minutes, and seconds since unit was rebooted
MAC Ethernet MAC address
S/N Serial number
Port Port number
Username User name (from User Add command)
Duration Duration of session
Socket Telnet socket number
From Socket Telnet client IP address with socket number in parentheses
IP Input and Output Network IP statistics, including number of packets delivered and discarded and fragments
TCP Network TCP statistics, including in segs, out segs, errors, and retransmissions
UDP Network UDP statistics, including in, out, errors, and no port events
BOOT BIOS/Bootstrap version, date, and time
APP Application version that is running, plus its date and time
Share Mode DISABLE, AUTO, or QUERY (from Server Share command)
To Next Page
Loading...
Need help?
General
