HP 16-port SCS User Manual

Technical specifications 81
Supported traps
The SCS supports the following MIB2 traps:
• authenticationFailure
• linkup
• linkDown
• coldStart
Table 6-4 lists the supported enterprise traps.
Table 6-4 SCS enterprise traps
Trap Description and variables
ConfigurationFileLoaded The SCS has loaded a configuration file.
Variables: Initiating user name and name of loaded file
FactoryDefaultsSet The SCS has received a command to set itself to factory default values. (The SCS sends this
trap after receiving the command, but before actually reverting to factory default values.)
ImageUpgradeResults An image upgrade has ended.
Variables: Result (successful or error code), initiating user name, image type (boot or
application), upgrade version number, and running version number (if the upgrade was
successful, the two version numbers will match)
ImageUpgradeStarted The SCS has started an image upgrade.
Variables: Initiating user name, image type (boot or application), new version number, and
current version number
NFSDisableRqstd A request has been made to disable NFS.
Variable: Requesting user name
NFSEnableRqstd A request has been made to enable NFS.
Variable: Requesting user name
NFSMountedOK NFS is enabled and the mount operation has completed successfully.
NFSMountFailedGaveUp NFS is enabled but repeated mount attempts have failed. No additional mount retries will be
performed.
Variables: Primary and secondary NFS error codes. See “NFS error codes and ports.”
NFSMountFailedRetrying NFS is enabled, and the first mount attempt failed. Additional mount retries are still being
performed.
Variables: Primary and secondary NFS error codes. See “NFS error codes and ports.”
NFSMountLost1stRetryFailed NFS is enabled, and a mount completed successfully. That mount was lost, and the first
attempt to re-establish that mount has now failed. Additional retries are being performed.
Variables: Primary and secondary NFS error codes. See “NFS error codes and ports.”
NFSMountLostGaveUp NFS is enabled, and a mount completed successfully. That mount was lost and repeated
attempts to re-establish that mount have failed. No addition mount retries will be performed.
Variables: Primary and secondary NFS error codes. See “NFS error codes and ports.”
NFSMountLostRetrying NFS is enabled, and a mount completed successfully. However, that mount has now been
lost and is being retried.
Variables: Primary and secondary NFS error codes. See “NFS error codes and ports.”
NFSMountVerifiedOK NFS is enabled and has successfully verified the mount in response to a subsequent NFS
Enable command.
NFSPortDisableRqstd An NFS Port Disable command has been issued.
Variables: Initiating user name and SCS port number
NFSPortEnableRqstd An NFS Port Enable command has been issued.
Variables: Initiating user name and SCS port number
NFSPortFileClosed NFS has closed the history file on the NFS server.
Variable: SCS port number
NFSPortFileOpenOK NFS is enabled on the port and has successfully opened the history file on the NFS server.
Variable: SCS port number

HP 16-port SCS Specifications

General

Brand	HP
Model	16-port SCS
Category	Network Hardware
Language	English