HP 16-port SCS User Manual

Technical specifications 83
Table 6-4 SCS enterprise traps
Trap Description and variables
UserLocked A user account has been locked.
Variables: Client IP address, locked user name, and reason
UserLogin A user logged in to the SCS.
Variable: User name
UserLogout A user logged out of the SCS
Variable: User name
UserModified A user’s definition has been modified in the SCS user database.
Variables: Initiating user name and modified user name
UserUnlocked A user account has been unlocked.
Variables: Client IP address, initiating user name, unlocked user name, and reason
Table 6-5 describes the error codes that can be reported by the SCS for NFS history file operations. Your display
might also have additional descriptive information.
NFS error codes
Table 6-5 NFS error codes
Error code Description
1 An unidentified error was encountered. Check the console output for possible additional information.
2 Internal SCS mount or unmount error.
3 The file type is incompatible with the port file name.
4 A port history file name error occurred.
5 A port history file write error occurred.
6 A port history file overrun error occurred.
7 From the remote procedure call: arguments cannot be encoded.
8 From the remote procedure call: the result cannot be decoded.
9 From the remote procedure call: unable to send.
10 From the remote procedure call: unable to receive.
11 From the remote procedure call: a time-out occurred.
12 From the remote procedure call: RPS versions were incompatible.
13 From the remote procedure call: an authentication error occurred.
14 From the remote procedure call: a program was unavailable.
15 From the remote procedure call: a program/version mismatch occurred.
16 From the remote procedure call: a procedure was unavailable.
17 From the remote procedure call: the server cannot decode the arguments.
18 From the remote procedure call: a remote system error occurred.
19 From the remote procedure call: an unknown host was encountered.
20 From the remote procedure call: a port mapper failure occurred.
21 From the remote procedure call: the program was not registered.
22 From the remote procedure call: the RPC failed due to an unspecified error.
23 From the remote procedure call: an unknown protocol was encountered.
24 From the remote procedure call: an unspecified error occurred.
25 From the remote procedure call: the remote address was unknown.
26 From the remote procedure call: an unspecified error occurred.

HP 16-port SCS Specifications

General

Brand	HP
Model	16-port SCS
Category	Network Hardware
Language	English