SCS commands 59
Access right: None needed
Access level: All
Syntax:
resume
Server commands
The Server command has several forms, as listed in Table 5-13.
Table 5-13 Server command summary
Command Description
Server CLI Specifies the console port type, CLI access character, modem initialization string, port history
mode operations, and port time-out value. It also enables and disables device connection from
the console port.
Server FLASH Updates the unit FLASH.
Server Init Reinitializes the SCS.
Server PPP Enables and disables PPP connections to the console port.
Server RADIUS Specifies RADIUS server parameters.
Server Reboot Reboots the unit.
Server Security Specifies user authentication method, enables and disables security lock-out, and enables and
disables connection methods.
Server Set Changes the SCS network configuration.
Server Share Specifies session sharing settings.
Server SNMP Enables and disables UDP port 161 SNMP processing.
Server SNMP Community Defines read, write, and trap SNMP community strings.
Server SNMP Manager Defines or deletes SNMP management entities.
Server SNMP Trap Enables and disables SNMP traps.
Server SNMP Trap
Destination
Defines or deletes destinations for enabled SNMP traps.
Server SSH Enables and disables SSH session access to the SCS and specifies the SSH authentication
method.
To Next Page
Loading...
Need help?
General
