HP 16-port SCS

SCS commands 71
Show Server CLI command
The Show Server CLI command displays the serial CLI settings.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server cli
Table 5-32 Show Server CLI command display fields
Field Content
CLI Port Console port terminal type.
Access Character Control character used to access the CLI.
History Indicates whether a port’s history buffer content is displayed (auto) or not displayed (hold) when
a user connects to the port and whether the buffer content is cleared (clear) or kept (keep) when
a session ends.
Connect Indicates whether a valid user on the console port may use the Connect command.
Modeminit string String used to initiate modem connections on the console port.
Server CLI Timeout Session time-out value, shown in full minute or minute:second form (for example, 3m for 3 minutes,
3:30 for 3 minutes, 3 seconds.
Show Server PPP command
The Show Server PPP command displays the current PPP settings that were configured with the Server PPP
command.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server ppp
Show Server RADIUS command
The Show Server RADIUS command displays the current SCS RADIUS settings that were configured with the
Server RADIUS command.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax:
show server radius