DESKTOP 
A 
COMPUTER 
, 
/-\- 
I 
I 
Figure 
4-15. 
HP-IB 
Ven'fication 
Test 
Setup 
Equipment: 
Controller 
............................................................................................................... 
HP 85A or 85B 
ROM Drawer 
........................................................................................................ 
HP 82936A 
110 ROM 
................................................................................................................ 
HP 00085-15003 
16K 
Memory Module, (85A only) 
...................................................................... 
HP 82903A 
............................................................................... 
HP-IB Interface CardICable 
HP 
82937A 
Procedure: 
The 
HP 
85 program is listed in 
Table 
4-4. 
It is an interactive program and almost completely self-exlanatory. The 
HP Basic prograni is not included in this manual, but is available upon request. Please contact your local HP Sales 
office for more information. 
1. 
Connect the equipment as shown in 
Figure 
4-15. 
2. 
To run the program, insert the cassette in the HP 85 and power-up the controller. If the controller is already 
ON, insert the cassette and type: 
CHAIN 
"Autost" 
then press 
END 
LINE. 
3.  Press the soft key corresponding to HP 
5334B, and follow the instructions displayed on the HP 85 screen. 
4. 
The program automatically starts and displays the program title, then it displays the following checkpoint 
summary: 
summary: 
HP 
5334B 
- 
Service 
Manual 
4-40