Identity Authentication
Use this page to choose an identity authentication method:
●
Pre-Shared Key
●
Certificates
●
Kerberos
Identity Authentication page items are described below.
Table 5-8 Identity Authentication page
Item Description
Pre-Shared Key If you will use a pre-shared key for authentication, select Pre-Shared Key. In the field
provided, enter a pre-shared key (ASCII string) that is shared by all hosts specified by
this rule. If a pre-shared key is used, it should be protected; any host that knows this
key may be authenticated.
Certificates If you will use certificates for authentication, select Certificates. A self-signed Jetdirect
certificate is pre-installed by factory default, and can be replaced. In addition, a CA
certificate must be installed for server authentication.
●
Status indicates whether a certificate is installed, or not installed.
●
Click View to view the certificate data of an installed certificate..
●
Click Configure to manage or install a certificate.
For information on requesting, configuring and installing certificates, see
Configuring
Certificates on page 88.
Kerberos Select Kerberos for Kerberos authentication.
The status of Kerberos authentication will be displayed (Configured or Not
Configured.
If Kerberos has been configured, click View to view the Kerberos configuration data.
Click Configure to configure Kerberos authentication.
Kerberos
For Kerberos configuration, choose to configure the Jetdirect print server for Kerberos authentication
manually, or by importing configuration files. Items on the Kerberos page are described below.
ENWW HP Jetdirect IPsec/Firewall Wizard 107
To Next Page
Loading...
Need help?
General
