HP 75000 SERIES C User Manual

Table 4-4. Maximum DC Offset with any AC Function
Entry
1.000 mV with 4.500 mV
0.001 mV
3.334 mV
with 14.99 mV
to 0.001 mv
9.999 mV
with 11.66 mV
10.00 mV
with 45.00 mV
to 0.010 mv
33.33 mV
with 33.33 mV
33.34 mV
with 149.9 mV
to
0.010 mV
99.99 mV
with 116.6 mV
100.0 mV
with 450.0 mV
to 0.100 mV
333.3 mV
with 333.3 mV
333.4 mV
with 1.499 V
to 0.100 mV
999.9 mV
with 1.166 V
1.000 V with 4.500 V
1.000 mV
High-Voltage Option
Fact
or
When the high-voltage output is used (option 001 is installed),
the minimum and maximum permissible DC offset voltages may
be determined by multiplying the amplitude and offset values in
Table 4-4 by four. The equation given on the previous page must be
changed to:
Maximum DC offset
= (201~) - (Amptdl2)
where
A = Attenuation factor (from Table 4-4) and
Amptd
= Amplitude in V(p-p) of the AC function.
Resolution of a DC offset entry is determined by the resolution of the
-
AC amplitude.
4-8 Understanding the HP E1440A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

HP 75000 SERIES C Specifications

General

Brand	HP
Model	75000 SERIES C
Category	Inverter
Language	English