HP 75000 SERIES C User Manual

110 !
120 Switch on the output
130
!
140 OUTPUT 70911 ; "OUTP ON"
150
END
Reset
The module has a reset state which is entered once a reset command
(*RST) has been received. The reset conditions are detailed in table
Table 1-1. Instrument Reset State
-
Parameter
N1Tiate:CONTinuous
lmplitude
IC Offset
Tnits
?requenc y
?req. Mode
Start Frequency
stop Frequency
Frequency Span
- Hold
Frequency Span
- Link
Marker (n)
Marker Frequency (n)
Sweep Time
Automatic Sweep Trace
Sweep Direction
Reference Oscillator Source
Reference Oscillator
Automatic
Function
AM State
PM State
Output
Output Amplifier
(HV Opt
001)
TTL Trigger Output(n)
TTL Trigger Output,
Source(n)
Phase
Phase Step
Phase Units
* SAV(n)
Reset State
IFF
: mV (P-P)
1 V
dolts
1 Hz
FIXed
3 Hz
21 MHz
3FF
SENTer
3FF (n
is 1 to 9)
I Hz (n is 1 to 9)
I s
3N
UP
SINe
OFF
OFF
OFF
OFF
OFF (n is
0 to 7)
SYNC (n is 0 to 7)
0 Deg
1 Deg
Radians
(n is
0 to
9)
Getting Started 1-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

HP 75000 SERIES C Specifications

General

Brand	HP
Model	75000 SERIES C
Category	Inverter
Language	English