HP 8591C User Manual

I
-
See Also
System Measurements Menu Map and Softkey Descriptions
System Measurements Softkey Function Descriptions
Table 6-3. information Contained in a Printout
Number
Description
1 Date and time the measurements were begun.” ITime is given in a N-hour format.1
2
The location code.”
3
The temperature.”
4
The analyzer serial number.t
5
Whether or not the spectrum analyzer had en oven reference.t The oven reference is available as a
option [Option 0041 for HP 8590 E-Series spectrum analyzers and is standard on the HP 8591C
analyzer.
6
The tune configuration.
1
The results of the composite triple beat testing lif CTB testing was selected when the testing was
performed].
6
The file number of test data file.
9
The tests.
10
The test results. An entry with a dash (‘-‘I indicates that the test was not performed.
11
The channel number.
12
The asterisk indicates that the channel was selected es a scrambled channel.
’ The location code and temperature entry are entered by the operator.
t The information for this entry is from the analyzer used to do the testing.
“Step 3. Install a printer” in Chapter 1.
“Step 6. Make the measurements now” in Chapter 3.
“Making Timed System Measurements” in Chapter 3.
6-15

HP 8591C Specifications

General

Brand	HP
Model	8591C
Category	Measuring Instruments
Language	English