EasyManua.ls Logo

HP 8591C - Page 347

HP 8591C
373 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I
-
The 3
dB
resolution bandwidth is
speciEed;
for others, it is the 6
dB
resolution bandwidth.
RS-232
A means of communication between devices, such as printers, plotters,
computers, modems, and analyzers. (The devices need to have RS-232
interfaces). Unlike the HP-IB interface bus, the RS-232 interface bus is
used for serial (not parallel) transmission.
scale factor
The per-division calibration of the vertical axis of the display.
scrambled
To alter an electronic signal so that a decoding device is necessary to
receive the signal.
shape factor
Refer to bandwidth selectivity.
single-sweep mode
The analyzer sweeps once when trigger conditions are met. Each sweep
is initiated by pressing an appropriate front-panel key, or by sending a
programming command.
softkey
Key labels displayed on a screen or monitor that are activated by
mechanical keys surrounding the display or located on a keyboard.
Softkey selections usually evoke menus that are written into the program
software. Front-panel key selections determine which menu (set of
softkeys) appears on the display.
span
Span equals the stop frequency minus the start frequency. The span
setting determines the horizontal-axis scale of the analyzer display.
span accuracy
The uncertainty of the indicated frequency separation of any two signals
on the display.
spectrum analyzer
A device that effectively performs a Fourier transform and displays the
individual spectral components (sine waves) that constitute a time-domain
signal.
Glossary- 14

Table of Contents

Related product manuals