HP 8591C - Page 356

I
-
AIR, 2-4, 3-4, 5-9
displayed position, 3-4
HRC, 2-4, 3-4, 5-9
IRC, 2-4, 3-4, 5-9
STD, 2-4, 3-4, 5-9
T, 2-4, 3-4, 5-9
channel measurements, list of, 2-2
channel number range, 6-18
channel numbers, 5- 10
channel numbers, entering, 5-10
channel numbers, valid, 3-23
CHANNEL SELECT description, 5-9, 7-8
channel selection, view, 6-36
CHANNEL SELECT key, 2- 11, 2-63
channel survey map, 3-22, 9-23
Channel Tuning description, 7-8
Channel Tuning key, 2-4, 3-4
characteristics, 9-3
carrier to noise, 9-6
CSOKTB, 9-6
CHECK CARD IN SLOT error message, 4-5
chroma/luma delay, 2-22
CLDI key, 2-22
clearing the test plan, 6-9
CLEAR TESTS description, 6-9
CLEAR TESTS key, 3-23, 3-25
clear the current test plan, 3-32
CLEAR TST PLAN description, 6-9
CLEAR TST PLAN key, 3-22, 3-32
clock
setting the time and date, 4-15
composite second order test, 8-16
composite tripe beat test, 8-18
CONFIG key, l-11, 3-37
connect cable TV signal, 2-9, 3-8
connecting analyzer to a printer, l-10
connecting cable TV signal, 2-10
contents of a printout, 6-10
CONTINUE key, 2-17, 2-24, 2-27, 2-40, 2-52, 2-57, 5-17
control line B, 8-19
CONTS SWEEP key, 2-58, 5-15
COPY key, 2-12, 2-19, 2-25, 2-28, 2-30, 2-35, 2-41, 2-46, 2-48
correction constants, l-8
coupler, 2-9, 3-8
Create Tstplan key, 3-22
Create TstPlan key, 3-23, 3-31
creating a test plan, 3-22
CROSSMOD key, 2-30
cross modulation test, 8-44
Index-4