Configuring GARP VLAN Registration Protocol (GVRP)
8 - 11
To display detailed GVRP information for an individual port, enter a command such as the following:
This display shows the following information.
Table 8.2: CLI Display of Detailed GVRP Information for a Port
This Field... Displays...
Port number The port for which information is being displayed.
GVRP Enabled Whether GVRP is enabled on the port.
GVRP Learning Whether the port can learn VLAN information from GVRP.
GVRP Applicant Whether the port can advertise VLAN information into GVRP.
Port State The port’s link state, which can be UP or DOWN.
Forwarding Whether the port is in the GVRP Forwarding state:
• NO – The port is in the Blocking state.
• YES – The port is in the Forwarding state.
HP9300(config)# show gvrp ethernet 2/1
Port 2/1 -
GVRP Enabled : YES
GVRP Learning : ALLOWED
GVRP Applicant : ALLOWED
Port State : UP
Forwarding : YES
VLAN Membership: [VLAN-ID] [MODE]
1 FORBIDDEN
2 FIXED
1001 NORMAL
1003 NORMAL
1004 NORMAL
1007 NORMAL
1009 NORMAL
1501 NORMAL
2507 NORMAL
4001 NORMAL
4093 FORBIDDEN
4094 FORBIDDEN
To Next Page
