Installation and Getting Started Guide
A - 18
Notification OSPF virtual nbr state changed,
rid <router-id>, nbr addr <ip-addr>,
nbr rid <nbr-router-id>, state <ospf-state>
Indicates that the state of an OSPF virtual
neighbor has changed.
The <router-id> is the router ID of the HP
device.
The <ip-addr> is the IP address of the
neighbor.
The <nbr-router-id> is the router ID of the
neighbor.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
•down
• attempt
• initializing
•2-way
• exchange start
• exchange
• loading
•full
• unknown
Table A.2: HP Syslog Messages (Continued)
Message Level Message Explanation
To Next Page
