HP 9304m - Page 320

Using Syslog
A - 23
Notification OSPF intf rcvd bad pkt, rid <router-id>,
intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
pkt type <pkt-type>
Indicates that an OSPF interface received a
bad packet.
The <router-id> is the router ID of the HP
device.
The <ip-addr> is the IP address of the
interface on the HP device.
The <src-ip-addr> is the IP address of the
interface from which the HP device received
the authentication failure.
The <packet-type> can be one of the
following:
•hello
• database description
• link state request
• link state update
• link state ack
• unknown
Notification OSPF virtual intf rcvd bad pkt,
rid <router-id>, intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
pkt type <pkt-type>
Indicates that an OSPF interface received a
bad packet.
The <router-id> is the router ID of the HP
device.
The <ip-addr> is the IP address of the
interface on the HP device.
The <src-ip-addr> is the IP address of the
interface from which the HP device received
the authentication failure.
The <packet-type> can be one of the
following:
•hello
• database description
• link state request
• link state update
• link state ack
• unknown
Table A.2: HP Syslog Messages (Continued)
Message Level Message Explanation