EasyManuals Logo

HP A5830 Series Command Reference

HP A5830 Series
249 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
8
PVID: 1
Mdi type: auto
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
Port priority: 0
Last clearing of counters: Never
Peak value of input: 0 bytes/sec, at 2011-05-28 10:02:36
Peak value of output: 0 bytes/sec, at 2011-05-28 10:02:36
Last 300 seconds input: 0 packets/sec 0 bytes/sec -%
Last 300 seconds output: 0 packets/sec 0 bytes/sec -%
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
Table 4 display interface command (in bridge mode) output description
Field
Description
GigabitEthernet1/0/1 current state
Physical state of the Ethernet interface. For more information, see
Table 5.
IP Packet Frame Type
Ethernet framing format on the interface.
Hardware address
Hardware address of the port.
Description
Description of the interface.
Loopback is not set
Loopback testing function is disabled.
Unknown-speed mode
Port speed is unknown.
unknown-duplex mode
Duplex mode is unknown.
Link speed type is autonegotiation
Interface will negotiate a speed with its peer.
link duplex type is autonegotiation
Interface will negotiate a duplex mode with its peer.
The Maximum Frame Length
Maximum Ethernet frame length allowed on the interface.
Broadcast MAX-ratio
Broadcast suppression threshold as a percentage of the interface
transmission capability. When the threshold is exceeded, the
interface drops broadcast packets.
Unicast MAX-ratio
Unknown unicast suppression threshold as a percentage of the
interface transmission capability. When the threshold is exceeded,
the interface drops unknown unicast packets.

Table of Contents

Other manuals for HP A5830 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5830 Series and is the answer not in the manual?

HP A5830 Series Specifications

General IconGeneral
BrandHP
ModelA5830 Series
CategorySwitch
LanguageEnglish

Related product manuals