HP Compaq t1000 - Using the Security Settings Dialog Box; TCP;IP Settings Dialog Box

70
Connection Confi
g
uration
The followin
g
table discusses the functions in this dialo
g
box.
Using the Security Settings Dialog Box
Click on the
Security...
command button in the second dialo
g
box of the
Dial-Up Configuration Wizard
to confi
g
ure dial-up security. When this command
button is pressed, the
Security Settings
dialo
g
box displays. Fi
g
ure 12-2 shows
this dialo
g
box.
Table 12-1 TCP/IP Settings Dialog Box
Function Description
Use Software Compression
Click on this check box to enable this
function. By default, this function is
activated and enabled.
Use IP Header Compression
Click on this check box to enable
Use
IP Header Compression
. By default,
this function is activated and enabled.
Use SLIP
Click on this check box to enable this
function. SLIP is Serial Line Internet
Protocol. By default, this function is not
enabled.
Use Assigned IP Address
Click here to activate this text box. By
default, the text entry box is not
activated.
Use Server-Assigned IP Addresses
Click here to disable server-assi
g
ned
addresses and to activate the text
entry boxes for typin
g
-in addresses.
By default, the text entry box is not
activated.
Use Default Gateway on Remote
Network
Click on this check box to enable this
function. By default, the function is
activated and enabled.