HP Compaq t1000 - Add or Change Modem Dialog Box; Using the Add;Change Modem Dialog Box

120
External Devices
Using the Add/Change Modem Dialog Box
To invoke the dialo
g
box, click on the
Add/Change Modem...
command button on
the
Devices
properties sheet. Table 20-1 discusses the functions of this dialo
g
box.
Note
The Hayes command set is discussed in
g
reater detail
in “Modem AT Commands.”
Table 20-1 Add or Change Modem Dialog Box
Function Description
Modem Name
This field displays the brand name of the modem in
your system.
Init Commands
Enter a modem initialization command strin
g
in this
field. The default is
ATEOV1&C1&D1<cr>
.
Flow Settings
Use this
g
roup box to set the followin
g
flow settin
g
s:
Flow Hardware
Enter a flow hardware command strin
g
in this field. The
default is
AT&K3<cr>
.
Flow Software
Enter a flow software command strin
g
in this field. The
default is
AT&K4<cr>
.
Flow Off
Enter a flow hardware command strin
g
in this field. The
default is
AT&K0<cr>
.