HP Compaq t1000 - Terminal Connector Pin Assignments; 10 Base-T and 100 Base-T Connector

37
Terminal Connector Pin
Assignments
The followin
g
fi
g
ure shows the pin assi
g
nments for the 10Base-T and 100Base-T
connector. This connector is located on the back panel of your terminal. See
“Terminal Features” for information about the back panel.
Note
It is recommended that you use Cate
g
ory 5 twisted-pair
cable to connect your terminal to a hub.
Figure 37-1 10Base-T and 100Base-T Connector
Pin
Signal Name
1
2
3
6
+Transmit Detect
-Transmit Detect
+Receive Detect
- Receive Detect
Hub
Terminal
10Base-T
Connector
1
8
RJ-45