HP Compaq t1000 - Security Properties Sheet

166
Security Properties
Using the Security Properties Sheet
To invoke the
Security
properties sheet:
1.
Press
F2
to invoke the
Terminal Properties
dialo
g
box.
2.
Click on the
Security
tab.
The followin
g
table describes the functions of this properties sheet.
Table 29-1 Security Properties Sheet
Function Description
Security Enable
This
g
roup box is used to enable terminal security and
access connection confi
g
urations. It contains the
followin
g
functions:
Security Enable
Click to enable terminal security and deactivate the
Hide Configure Tab
function. By default this function
is disabled.
Hide Configure Tab
Click to enable. This function hides the
Configure
tab
in the
T1000 Connections Manager
. By default this
function is disabled.
Failover Enable
Use this
g
roup box to manipulate connection
parameters. See “Failover” for more information.
Failover Enable
Click to enable the failover function. Enablin
g
this
function deactivates the
PingBeforeConnect
function.
and activates
Multiple Connect
and
Verbose
functions. By default this function is disabled.
Multiple Connect
Click to enable this function. Failover must be enabled
before you can access this function. By default this
function is not activated.
PingBeforeConnect
Click to enable this function. Enablin
g
this function will
activate
Verbose
. By default this function is disabled.