HP Compaq t1000 - Basic Properties Sheet; Using the Wavelan;Ieee Settings Dialog Box

136
External Devices
Using the WaveLAN/IEEE Settings Dialog Box
To invoke this dialo
g
box:
1.
Press
F2
to invoke the
Terminal Properties
dialo
g
box.
2.
Click on the
Devices
tab.
3.
Click on the
WaveLAN
icon in the icon container.
The
WaveLAN/IEEE Settings
dialo
g
box contains three properties sheets. The
rest of this section discusses these properties sheets.
Basic Properties Sheet
The
Basic
properties sheet is the default of the dialo
g
box and is shown in
Fi
g
ure 24-1. The followin
g
table discusses the properties sheet.
Table 24-1 Basic Properties Sheet
Function Description
WaveLAN Network Name
Enter in this field the name of the LAN
network that you want to connect to.
You can enter any. If you enter any,
the terminal will connect to any
network that provides
g
ood
communications quality. The default
for this field is blank.
Ad-Hoc Demo Mode
Click here to enable
Ad-hoc Demo
Mode
. Enablin
g
this mode will allow
the terminal to connect to a small
wireless work
g
roup. In this mode the
terminal will:
• I
g
nore
WaveLAN Network Name
.
• I
g
nore
WavePOINT-ll
access
points.
• Fix the radio to operate at factory
default.
By default the check box is
unchecked.