HP Compaq t1000 - Call Options Properties Sheet

67
Click on the
Call Options
tab to invoke the
Call Options
properties sheet. The
followin
g
table discusses the functions of this properties sheet.
Note
See “Null Modem Cable Pin Assi
g
nments” for a
su
gg
ested null modem cable for use with your terminal.
Table 11-3 Call Options Properties Sheet
Function Description
Call Setup
Use this
g
roup box to confi
g
ure the followin
g
call
parameters:
Cancel the Call if Not Connected Within
1.
Enter in this field the number of seconds to wait
before a call is canceled.
2.
Click the check box to enable the function.
The default is
120
with the function enabled.
Wait for Dial Tone Before Dialing
Click on the check box to enable the function. The
default for this function is enabled.
Wait for Credit Card Tone
Enter in the field the period (in seconds) of time to wait.
The default is
0
.
Extra Settings
Use this field for special modem commands. See
“Modem AT Commands” in Gettin
g
Help for more
details.