HP Compaq t1000 - Using the Network Properties Sheet; Network Properties Sheet

30
Advanced User Interface
Using the Network Properties Sheet
To invoke this properties sheet:
1.
Press
F2
to invoke the
Terminal Properties
dialo
g
box.
2.
Click on the
Network
tab.
The followin
g
table discusses the functions of the
Network
properties sheet.
Table 5-1 Network Properties Sheet
Function Description
Obtain an Address from a
DHCP Server
Click on this radio button to enable DHCP addressin
g
. An IP
address will be automatically assi
g
ned to your terminal by the
DHCP server.
Specify an IP Address
Use this
g
roup box to enter a specific IP address.
IP Address
Enter a static IP address in this field.
Subnet Mask
Enter the subnet mask of the IP address.
Gateway
Enter the
g
ateway of the IP address.
Network Speed
Use this scroll list to select a network communication speed.
The choices are (in Mb/s):
•
Auto Detect
•
10 Mbs - Half Duplex
•
10 Mbs - Full Duplex
•
100 Mbs - Half Duplex
•
100 Mbs - Full Duplex