31
Note
If you do not know your network's communication
speed or whether the communication link should be
half- or full-duplex, contact your system administrator.
Advanced Network
Click on this command button to invoke the
Advanced
Network Settings
dialo
box:
The
Advanced Network
command button is activated when
Specify an IP Address
is selected. By default this command
button is deactivated.
Enable DNS
Use this
roup box to set domain, primary, and secondary IP
addresses for DNS. Enable the function by clickin
to check
Enable DNS
. The default for the function is disabled
Enable WINS
Use this
roup box to set the primary and secondary IP
addresses of a WINS server. Enable the function by clickin
to
check
Enable WINS
. The default for the function is disabled.
Table 5-1 Network Properties Sheet, Continued
Function Description
To Next Page
Loading...
