125
MicroTouch Touchscreen
Fi
ure 21-2 shows the
Microtouch Touchscreen Properties
dialo
box. Use this
dialo
box to set up a Microtouch touch screen.
Figure 21-2 Microtouch Touchscreen Properties Dialog Box
To invoke this dialo
box:
1.
Press
F2
to invoke the
Terminal Properties
dialo
box.
2.
Click on the
Devices
tab.
3.
Click on the
Touchscreen
icon in the properties sheet’s icon container.
The
Microtouch Touchscreen Properties
dialo
box contains four properties
sheets. The rest of this section discusses these properties sheets.
Hardware Properties Sheet
The
Hardware
properties sheet is displayed by default and is shown in
Fi
ure 21-2. The followin
table discusses the properties sheet.
Table 21-2 Hardware Properties Sheet
Function Description
Information
This
roup box displays information
about the touchscreen that is
connected to your terminal. To display
the information, click on
Find
Touchscreen
(see below).
Controller Type
This field shows the controller type.