HP Compaq t1000 - FTP and Bootstrap.exe; The Upgrade Process

151
FTP and Bootstrap.exe
Note
Bootstrap.exe and params.ini must be installed on your
FTP server to up
g
rade the terminal. To install these
files, dra
g
and drop them from the CD-ROM to the
appropriate directory on your FTP server. The up
g
rade
firmware can be obtained from the manufacturer’s
customer support.
Download is initiated throu
g
h the
Upgrade
command button on the
Upgrade
properties sheet. Information in the
Upgrade
properties sheet must be filled out to
ensure a proper download. See “Chan
g
in
g
Terminal Properties” in Advanced User
Interface for more details about this properties sheet.
The Upgrade Process
To up
g
rade:
1.
Place bootstrap.exe, params.ini, and the new firmware file on your FTP server.
2.
Press
F2
to invoke the
Terminal Properties
dialo
g
box.
3.
Click on the
Upgrade
properties sheet tab and enter the appropriate
information.
Status
This display box shows status information about the
connection to the FTP server, and the firmware
download. Connect and download errors are also
reported. The default is blank.
Save Password
Check this box to save the entered password in the
re
g
istry.
Upgrade
Click on this command button to initiate the up
g
rade
procedure. By default the button is disabled until an
entry is made in the
FTP Server
field.
Table 26-1 Upgrade Properties Sheet, Continued
Function Description