HP Compaq t1000 - The Upgrade Process; 28 DHCP Firmware Upgrades

157
The Upgrade Process
1.
Ensure that the custom MIB (Mana
g
ement Information Base) is compiled by
your SNMP mana
g
er.
Note
In order to initiate an SNMP up
g
rade, you must know
the FTP or TFTP server’s IP address or machine name,
and the absolute path to the ima
g
e on the FTP or TFTP
server.
2.
Enable
SNMP Update Enable
if it is not enabled.
Terminal Information
Use this
g
roup box to list information about terminals.
Description
Use this
g
roup box to describe a terminal.
Terminal Name
Type the name of a terminal in this field. On default,
this displays the WBT and the MAC address of the
product.
Location
Type the location of the terminal in this field.
Contact
Type the name of the administrator of the subject
terminal in this field.
Custom
Use the followin
g
fields to type in any custom messa
g
e
associated with the subject terminal:
•
Field 1
•
Field 2
•
Field 3
Each field will take 16 characters maximum.
Table 27-1 SNMP Network Administration Dialog Box, Continued
Function Description