HP Compaq t1000 - Firewall Settings Properties Sheet; Setting up a SOCKS Firewall

42
Advanced User Interface
Setting Up a SOCKS Firewall
Use the
Firewall Settings
properties sheet to set up a SOCKS (Socket Secure)
firewall. To invoke this properties sheet:
1.
Click on the
ICA Client Settings
command button on the
Apps
properties
sheet.
2.
Click the
Firewall Settings
tab.
The properties sheet displays. The followin
g
fi
g
ure shows this sheet.
Figure 7-4 Firewall Settings Properties Sheet
The followin
g
table describes each of the functions of this sheet.
Table 7-4 Firewall Settings Properties Sheet
Function Description
Use Alternate Address Through
Firewalls
By default the box is not checked.
SOCKS
Use this
g
roup box to enable and
confi
g
ure SOCKS protocol.
Connect Via SOCKS Proxy
Check this box to enable a SOCKS
proxy connection. SOCKS is a
protocol that sets up a proxy server
between a client and a server. This
proxy server then acts as a channel for
communication between the client and
server. By default the box is not
checked.