HP Compaq t1000 - Upgrade Properties Sheet; Manual DHCP Firmware Upgrades

162
Firmware Up
g
rades
Make sure your DHCP options match the options on
the DHCP server.
6.
Click on the
Change DHCP Option...
command button
.
7.
Use the
Change Option IDs
dialo
g
box to chan
g
e options, then click on
OK
to
save.
Note
Pay special attention to these FTP Option IDs
functions:
File Server
(the location of the server where
the firmware resides), and
File Root Path
(the location
of the firmware). If they are not correct, the up
g
rade will
fail.
8.
Click on the
Upgrade
tab.
9.
Click on the
Use FTP Information From DHCP Server
radio button on the
Upgrade
properties sheet.
Note
You will need the ima
g
e, bootstrap.exe, and the
params.ini files on the FTP server to do the up
g
rade.
10.
Shut down the terminal. See “Shuttin
g
Down the Terminal” in the users
g
uide for
more information.
Your terminal will automatically up
g
rade itself when it is turned on a
g
ain.
Manual DHCP Firmware Upgrades
1.
Follow instruction 1 throu
g
h 3 and 5 throu
g
h 8 in “The Up
g
rade Process.”
2.
Click on the
Upgrade...
command button on the
Upgrade
properties sheet.
This will initiate the firmware up
g
rade. Once the up
g
rade is complete, the terminal
will reboot to the
Setup Wizard
.