HP Compaq t1000 - Upgrade Properties Sheet

150
Fimware Up
g
rades
Using the Upgrade Properties Sheet
To invoke this properties sheet:
1.
Press the
F2
key.
2.
Click on the
Upgrade
tab in the
Terminal Properties
dialo
g
box.
The followin
g
table describes the functions found on this properties sheet.
Table 26-1 Upgrade Properties Sheet
Function Description
Local Firmware
Upgrade
Use this
g
roup box to up
g
rade your terminal's firmware
usin
g
an FTP server. The functions are:
Use FTP Information from DHCP Server
Select this function if you want to
g
et the FTP server
and directory information from a DHCP server. Click on
this radio button to select the function. By default the
function is disabled.
Use Local FTP Information
Select this function if you want to enter the FTP server
you will use for the up
g
rade. Click on the radio button
to select the function. By default the function is
enabled.
Server Name
Enter the name or IP address of the FTP server where
the binary and params.ini reside. The default is blank.
Server Directory
Enter the directory on the FTP server where the binary
and params.ini reside. The default is blank.
User ID
Enter your user account in this field. The default is
Anonymous
.
Password
Enter your password in this field. The default is
*****
.