HP Compaq t1000 - Setup; 25 Cable Firmware Upgrades

25
Cable Firmware Upgrades
The followin
g
section describes the cable method of firmware download. The cable
method for all terminals is parallel download, usin
g
a LapLink

cable and the
MS-DOS xfer.exe pro
g
ram.
Setup
The followin
g
equipment may be needed, dependin
g
on the download procedure
used:
• IBM-compatible PC with a CD-ROM drive and a parallel port.
• Terminal firmware up
g
rade diskette or CD.
• LapLink or equivalent parallel port communications cable (used only if parallel
port is used for downloadin
g
).
Note
For convenience, drive D:\ is used here for the CD
drive. You should substitute the appropriate drive letter
for your PC.