EasyManuals Logo

HP EliteDesk 800 G3 TWR User Manual

HP EliteDesk 800 G3 TWR
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Drives
For a list of available drives, see Drives on page 10.
When installing drives, follow these guidelines:
The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on
the system board labeled SATA0.
Connect secondary hard drives and optical drives to any of the light blue SATA connectors on the system
board (labeled SATA1, SATA2, SATA3, and SATA4).
You must install mounting screws for hard drives and 5.25-inch optical drives to ensure the drive will
line up correctly in the drive cage and lock in place. HP has provided four extra 3.5-inch hard drive
mounting screws installed on top of the drive bay.
IMPORTANT: To prevent loss of work and damage to the computer or drive:
If you are inserting or removing a drive, shut down the operating system properly, turn o the computer, and
unplug the power cord. Do not remove a drive while the computer is on or in standby mode.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid
touching the connector.
Handle a drive carefully; do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic elds such as
monitors or speakers.
If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label the
package “Fragile: Handle With Care.”
Drives 35

Table of Contents

Other manuals for HP EliteDesk 800 G3 TWR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP EliteDesk 800 G3 TWR and is the answer not in the manual?

HP EliteDesk 800 G3 TWR Specifications

General IconGeneral
Form FactorTower
Processor OptionsIntel Pentium, Intel Celeron
MemoryUp to 64 GB DDR4-2400 SDRAM
Storage Options2.5" HDD/SSD, M.2 SSD
GraphicsIntel HD Graphics 630
Operating SystemWindows 10 Pro
AudioRealtek HD ALC221-VB Audio
Expansion Slots1 PCIe x16
Ports (Front)2 x USB 3.1 Gen 1, 2 x USB 2.0, 1 x headphone/microphone combo
Ports (Rear)4 x USB 3.1 Gen 1, 4 x USB 2.0, 1 x VGA, 1 x DisplayPort, 1 x RJ-45, 1 x audio line-out, 1 x audio line-in
Power Supply250W, up to 92% efficient PSU
Optical DriveOptional DVD-Writer
ChipsetIntel® Q270

Related product manuals