Add-On Devices
Installing Additional RAM
90 Reference Guide
7. Loosen the three screws holding the top of the keyboard. (The keyboard retains the
screws.)
CAUTION
When opening the keyboard, be careful not to pull on the cable connecting the
keyboard to the notebook.
8. Raise the top edge of the keyboard, then fold it onto the front of the case.
WARNING
Do not touch the metal surfaces inside the notebook until they have cooled off.
They could be very hot if the notebook was running recently.
Do not touch the electronic components inside the notebook. Static electricity can
permanently damage them.
9. Release the two latches at the sides of the RAM module by pressing them outward, so
that the free edge of the module pops up.
To Next Page
Loading...
Need help?
General